New Specialist Coupling for Diesel and Generator Applications
Renold Hi-Tec Couplings of Halifax, West Yorkshire, has launched its new DCB-GS rubber in compression coupling; a zero backlash, very low maintenance unit specifically designed for use in generator set and general diesel drive applications.
Described by Renold engineers as a 'quart in a pint pot,' the DCB-GS is based on the industry-proven DCB range and offers considerable advantages over the standard product including a 30 per cent reduction in weight and a reduction in overall length.
Incorporating a fail-safe, long life design, a significant feature of the DCB-GS coupling is its ability to control resonant torsional vibration, resulting in low vibratory loads in driveline components.
As with all Renold Hi-Tec couplings, the DCB-GS is robustly constructed for optimum durability and flexibility, while pre-compressed, moulded rubber inserts minimise backlash and prevent metal-to-metal contact during torque reversal conditions. Fully dynamically tested, the DCB-GS has been found to withstand 20,000 full torque reversals without evidence of damage.
Torsional stiffness is similar to that of the original DCB, however the DCB-GS may be tuned independently for lower torque stiffness and can accept nominal torque ratings up to 846kNm. Standard DCB rubber blocks are used in the product, with a full range of rubber compound options available for optimum stiffness and damping.
The DCB-GS is available now from Renold agents worldwide.
Note to Editors
Renold Hi-Tec Couplings, of Halifax, West Yorkshire, has been a world leader in the design and manufacture of flexible couplings for over 50 years, providing solutions for absorption of shock loads, noise attenuation, misalignment and the detuning of damaging vibrations.
Products are well-known for durability, long life and reliability, and the company's design capability and innovative skills are recognised in customising couplings to exact individual requirements, offering anything from a single product to a full turnkey solution package.
Renold Hi-Tec Couplings is accredited to ISO 9001: 2000 standard and part of Renold Plc, the international manufacturer of gearing, roller chain, clutches, couplings and other power transmission products.
For more information please contact:
Alan Dean, Product Development Manager
Renold Hi-Tec Couplings
112 Parkinson Lane
Halifax
HX1 3QH
England
Tel: +44 (0) 1422 255000
Fax: +44 (0) 1422 255100
E-mail: adean@hitec.renold.com
PR Contact:
Chris Miles, FMPR, Ingrow Bridge Works, Ingrow, Keighley, BD21 5EF, England
Tel: +44 (0) 1535 669191
Fax: +44 (0) 1535 667272
E-mail: chris@fmpr.co.uk
