REUK

View Navigation

REUK

The REUK Series is a Freewheel incorporating a 62 Series bearing.

The self-centering freewheels are already grease-lubricated and come with dust-proof protection.

For the REUK model, the transmission occurs by mounting the inner race onto a shaft with an n6 tolerance. The outer race is fitted into a housing with an N6 tolerance.

 

The REUKC model is equipped with a keyway on the inner race and should be fitted on k6 tolerance shafts. The outer race is fitted into a housing with an N6 tolerance.

 

The REUKCC model is equipped with a keyway on the inner and outer race. The inner race is fitted onto a shaft with an n6 tolerance. The outer race is fitted into a housing with an H6 tolerance.

 

The REUK2RS model is equipped with waterproof seals.

 

The REUK Series is built with a C5 clearance that turns into a normal clearance after keying.

The races can be glued to the shaft and the seat. In this case, the clearance remains C5.

For more information and advice on the selection of ball bearing freewheels, contact Renold today on +44 (0)29 2079 2737.

Close
Close